Struct std::ffi::os_str::OsString

1.0.0 · source ·
pub struct OsString {
    inner: Buf,
}
Expand description

A type that can represent owned, mutable platform-native strings, but is cheaply inter-convertible with Rust strings.

The need for this type arises from the fact that:

  • On Unix systems, strings are often arbitrary sequences of non-zero bytes, in many cases interpreted as UTF-8.

  • On Windows, strings are often arbitrary sequences of non-zero 16-bit values, interpreted as UTF-16 when it is valid to do so.

  • In Rust, strings are always valid UTF-8, which may contain zeros.

OsString and OsStr bridge this gap by simultaneously representing Rust and platform-native string values, and in particular allowing a Rust string to be converted into an “OS” string with no cost if possible. A consequence of this is that OsString instances are not NUL terminated; in order to pass to e.g., Unix system call, you should create a CStr.

OsString is to &OsStr as String is to &str: the former in each pair are owned strings; the latter are borrowed references.

Note, OsString and OsStr internally do not necessarily hold strings in the form native to the platform; While on Unix, strings are stored as a sequence of 8-bit values, on Windows, where strings are 16-bit value based as just discussed, strings are also actually stored as a sequence of 8-bit values, encoded in a less-strict variant of UTF-8. This is useful to understand when handling capacity and length values.

Capacity of OsString

Capacity uses units of UTF-8 bytes for OS strings which were created from valid unicode, and uses units of bytes in an unspecified encoding for other contents. On a given target, all OsString and OsStr values use the same units for capacity, so the following will work:

use std::ffi::{OsStr, OsString};

fn concat_os_strings(a: &OsStr, b: &OsStr) -> OsString {
    let mut ret = OsString::with_capacity(a.len() + b.len()); // This will allocate
    ret.push(a); // This will not allocate further
    ret.push(b); // This will not allocate further
    ret
}
Run

Creating an OsString

From a Rust string: OsString implements From<String>, so you can use my_string.into() to create an OsString from a normal Rust string.

From slices: Just like you can start with an empty Rust String and then String::push_str some &str sub-string slices into it, you can create an empty OsString with the OsString::new method and then push string slices into it with the OsString::push method.

Extracting a borrowed reference to the whole OS string

You can use the OsString::as_os_str method to get an &OsStr from an OsString; this is effectively a borrowed reference to the whole string.

Conversions

See the module’s toplevel documentation about conversions for a discussion on the traits which OsString implements for conversions from/to native representations.

Fields§

§inner: Buf

Implementations§

source§

impl OsString

source

pub fn new() -> OsString

Constructs a new empty OsString.

Examples
use std::ffi::OsString;

let os_string = OsString::new();
Run
source

pub fn as_os_str(&self) -> &OsStr

Converts to an OsStr slice.

Examples
use std::ffi::{OsString, OsStr};

let os_string = OsString::from("foo");
let os_str = OsStr::new("foo");
assert_eq!(os_string.as_os_str(), os_str);
Run
source

pub fn into_string(self) -> Result<String, OsString>

Converts the OsString into a String if it contains valid Unicode data.

On failure, ownership of the original OsString is returned.

Examples
use std::ffi::OsString;

let os_string = OsString::from("foo");
let string = os_string.into_string();
assert_eq!(string, Ok(String::from("foo")));
Run
source

pub fn push<T: AsRef<OsStr>>(&mut self, s: T)

Extends the string with the given &OsStr slice.

Examples
use std::ffi::OsString;

let mut os_string = OsString::from("foo");
os_string.push("bar");
assert_eq!(&os_string, "foobar");
Run
1.9.0 · source

pub fn with_capacity(capacity: usize) -> OsString

Creates a new OsString with at least the given capacity.

The string will be able to hold at least capacity length units of other OS strings without reallocating. This method is allowed to allocate for more units than capacity. If capacity is 0, the string will not allocate.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let mut os_string = OsString::with_capacity(10);
let capacity = os_string.capacity();

// This push is done without reallocating
os_string.push("foo");

assert_eq!(capacity, os_string.capacity());
Run
1.9.0 · source

pub fn clear(&mut self)

Truncates the OsString to zero length.

Examples
use std::ffi::OsString;

let mut os_string = OsString::from("foo");
assert_eq!(&os_string, "foo");

os_string.clear();
assert_eq!(&os_string, "");
Run
1.9.0 · source

pub fn capacity(&self) -> usize

Returns the capacity this OsString can hold without reallocating.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let os_string = OsString::with_capacity(10);
assert!(os_string.capacity() >= 10);
Run
1.9.0 · source

pub fn reserve(&mut self, additional: usize)

Reserves capacity for at least additional more capacity to be inserted in the given OsString. Does nothing if the capacity is already sufficient.

The collection may reserve more space to speculatively avoid frequent reallocations.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let mut s = OsString::new();
s.reserve(10);
assert!(s.capacity() >= 10);
Run
1.63.0 · source

pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError>

Tries to reserve capacity for at least additional more length units in the given OsString. The string may reserve more space to speculatively avoid frequent reallocations. After calling try_reserve, capacity will be greater than or equal to self.len() + additional if it returns Ok(()). Does nothing if capacity is already sufficient. This method preserves the contents even if an error occurs.

See the main OsString documentation information about encoding and capacity units.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples
use std::ffi::{OsStr, OsString};
use std::collections::TryReserveError;

fn process_data(data: &str) -> Result<OsString, TryReserveError> {
    let mut s = OsString::new();

    // Pre-reserve the memory, exiting if we can't
    s.try_reserve(OsStr::new(data).len())?;

    // Now we know this can't OOM in the middle of our complex work
    s.push(data);

    Ok(s)
}
Run
1.9.0 · source

pub fn reserve_exact(&mut self, additional: usize)

Reserves the minimum capacity for at least additional more capacity to be inserted in the given OsString. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let mut s = OsString::new();
s.reserve_exact(10);
assert!(s.capacity() >= 10);
Run
1.63.0 · source

pub fn try_reserve_exact( &mut self, additional: usize ) -> Result<(), TryReserveError>

Tries to reserve the minimum capacity for at least additional more length units in the given OsString. After calling try_reserve_exact, capacity will be greater than or equal to self.len() + additional if it returns Ok(()). Does nothing if the capacity is already sufficient.

Note that the allocator may give the OsString more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer try_reserve if future insertions are expected.

See the main OsString documentation information about encoding and capacity units.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples
use std::ffi::{OsStr, OsString};
use std::collections::TryReserveError;

fn process_data(data: &str) -> Result<OsString, TryReserveError> {
    let mut s = OsString::new();

    // Pre-reserve the memory, exiting if we can't
    s.try_reserve_exact(OsStr::new(data).len())?;

    // Now we know this can't OOM in the middle of our complex work
    s.push(data);

    Ok(s)
}
Run
1.19.0 · source

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the OsString to match its length.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let mut s = OsString::from("foo");

s.reserve(100);
assert!(s.capacity() >= 100);

s.shrink_to_fit();
assert_eq!(3, s.capacity());
Run
1.56.0 · source

pub fn shrink_to(&mut self, min_capacity: usize)

Shrinks the capacity of the OsString with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

If the current capacity is less than the lower limit, this is a no-op.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsString;

let mut s = OsString::from("foo");

s.reserve(100);
assert!(s.capacity() >= 100);

s.shrink_to(10);
assert!(s.capacity() >= 10);
s.shrink_to(0);
assert!(s.capacity() >= 3);
Run
1.20.0 · source

pub fn into_boxed_os_str(self) -> Box<OsStr>

Converts this OsString into a boxed OsStr.

Examples
use std::ffi::{OsString, OsStr};

let s = OsString::from("hello");

let b: Box<OsStr> = s.into_boxed_os_str();
Run

Methods from Deref<Target = OsStr>§

source

pub fn to_str(&self) -> Option<&str>

Yields a &str slice if the OsStr is valid Unicode.

This conversion may entail doing a check for UTF-8 validity.

Examples
use std::ffi::OsStr;

let os_str = OsStr::new("foo");
assert_eq!(os_str.to_str(), Some("foo"));
Run
source

pub fn to_string_lossy(&self) -> Cow<'_, str>

Converts an OsStr to a Cow<str>.

Any non-Unicode sequences are replaced with U+FFFD REPLACEMENT CHARACTER.

Examples

Calling to_string_lossy on an OsStr with invalid unicode:

// Note, due to differences in how Unix and Windows represent strings,
// we are forced to complicate this example, setting up example `OsStr`s
// with different source data and via different platform extensions.
// Understand that in reality you could end up with such example invalid
// sequences simply through collecting user command line arguments, for
// example.

#[cfg(unix)] {
    use std::ffi::OsStr;
    use std::os::unix::ffi::OsStrExt;

    // Here, the values 0x66 and 0x6f correspond to 'f' and 'o'
    // respectively. The value 0x80 is a lone continuation byte, invalid
    // in a UTF-8 sequence.
    let source = [0x66, 0x6f, 0x80, 0x6f];
    let os_str = OsStr::from_bytes(&source[..]);

    assert_eq!(os_str.to_string_lossy(), "fo�o");
}
#[cfg(windows)] {
    use std::ffi::OsString;
    use std::os::windows::prelude::*;

    // Here the values 0x0066 and 0x006f correspond to 'f' and 'o'
    // respectively. The value 0xD800 is a lone surrogate half, invalid
    // in a UTF-16 sequence.
    let source = [0x0066, 0x006f, 0xD800, 0x006f];
    let os_string = OsString::from_wide(&source[..]);
    let os_str = os_string.as_os_str();

    assert_eq!(os_str.to_string_lossy(), "fo�o");
}
Run
source

pub fn to_os_string(&self) -> OsString

Copies the slice into an owned OsString.

Examples
use std::ffi::{OsStr, OsString};

let os_str = OsStr::new("foo");
let os_string = os_str.to_os_string();
assert_eq!(os_string, OsString::from("foo"));
Run
1.9.0 · source

pub fn is_empty(&self) -> bool

Checks whether the OsStr is empty.

Examples
use std::ffi::OsStr;

let os_str = OsStr::new("");
assert!(os_str.is_empty());

let os_str = OsStr::new("foo");
assert!(!os_str.is_empty());
Run
1.9.0 · source

pub fn len(&self) -> usize

Returns the length of this OsStr.

Note that this does not return the number of bytes in the string in OS string form.

The length returned is that of the underlying storage used by OsStr. As discussed in the OsString introduction, OsString and OsStr store strings in a form best suited for cheap inter-conversion between native-platform and Rust string forms, which may differ significantly from both of them, including in storage size and encoding.

This number is simply useful for passing to other methods, like OsString::with_capacity to avoid reallocations.

See the main OsString documentation information about encoding and capacity units.

Examples
use std::ffi::OsStr;

let os_str = OsStr::new("");
assert_eq!(os_str.len(), 0);

let os_str = OsStr::new("foo");
assert_eq!(os_str.len(), 3);
Run
source

pub fn as_os_str_bytes(&self) -> &[u8]

🔬This is a nightly-only experimental API. (os_str_bytes #111544)

Converts an OS string slice to a byte slice. To convert the byte slice back into an OS string slice, use the OsStr::from_os_str_bytes_unchecked function.

The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit ASCII.

Note: As the encoding is unspecified, any sub-slice of bytes that is not valid UTF-8 should be treated as opaque and only comparable within the same rust version built for the same target platform. For example, sending the slice over the network or storing it in a file will likely result in incompatible byte slices. See OsString for more encoding details and std::ffi for platform-specific, specified conversions.

1.53.0 · source

pub fn make_ascii_lowercase(&mut self)

Converts this string to its ASCII lower case equivalent in-place.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To return a new lowercased value without modifying the existing one, use OsStr::to_ascii_lowercase.

Examples
use std::ffi::OsString;

let mut s = OsString::from("GRÜßE, JÜRGEN ❤");

s.make_ascii_lowercase();

assert_eq!("grÜße, jÜrgen ❤", s);
Run
1.53.0 · source

pub fn make_ascii_uppercase(&mut self)

Converts this string to its ASCII upper case equivalent in-place.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To return a new uppercased value without modifying the existing one, use OsStr::to_ascii_uppercase.

Examples
use std::ffi::OsString;

let mut s = OsString::from("Grüße, Jürgen ❤");

s.make_ascii_uppercase();

assert_eq!("GRüßE, JüRGEN ❤", s);
Run
1.53.0 · source

pub fn to_ascii_lowercase(&self) -> OsString

Returns a copy of this string where each character is mapped to its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use OsStr::make_ascii_lowercase.

Examples
use std::ffi::OsString;
let s = OsString::from("Grüße, Jürgen ❤");

assert_eq!("grüße, jürgen ❤", s.to_ascii_lowercase());
Run
1.53.0 · source

pub fn to_ascii_uppercase(&self) -> OsString

Returns a copy of this string where each character is mapped to its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use OsStr::make_ascii_uppercase.

Examples
use std::ffi::OsString;
let s = OsString::from("Grüße, Jürgen ❤");

assert_eq!("GRüßE, JüRGEN ❤", s.to_ascii_uppercase());
Run
1.53.0 · source

pub fn is_ascii(&self) -> bool

Checks if all characters in this string are within the ASCII range.

Examples
use std::ffi::OsString;

let ascii = OsString::from("hello!\n");
let non_ascii = OsString::from("Grüße, Jürgen ❤");

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());
Run
1.53.0 · source

pub fn eq_ignore_ascii_case<S: AsRef<OsStr>>(&self, other: S) -> bool

Checks that two strings are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

Examples
use std::ffi::OsString;

assert!(OsString::from("Ferris").eq_ignore_ascii_case("FERRIS"));
assert!(OsString::from("Ferrös").eq_ignore_ascii_case("FERRöS"));
assert!(!OsString::from("Ferrös").eq_ignore_ascii_case("FERRÖS"));
Run
source

pub(crate) fn display(&self, formatter: &mut Formatter<'_>) -> Result

Trait Implementations§

source§

impl AsRef<OsStr> for OsString

source§

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl AsRef<Path> for OsString

source§

fn as_ref(&self) -> &Path

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl Borrow<OsStr> for OsString

source§

fn borrow(&self) -> &OsStr

Immutably borrows from an owned value. Read more
source§

impl Clone for OsString

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for OsString

source§

fn fmt(&self, formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
1.9.0 · source§

impl Default for OsString

source§

fn default() -> OsString

Constructs an empty OsString.

source§

impl Deref for OsString

§

type Target = OsStr

The resulting type after dereferencing.
source§

fn deref(&self) -> &OsStr

Dereferences the value.
1.44.0 · source§

impl DerefMut for OsString

source§

fn deref_mut(&mut self) -> &mut OsStr

Mutably dereferences the value.
source§

impl Eq for OsString

1.52.0 · source§

impl<'a> Extend<&'a OsStr> for OsString

source§

fn extend<T: IntoIterator<Item = &'a OsStr>>(&mut self, iter: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one #72631)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)
Reserves capacity in a collection for the given number of additional elements. Read more
1.52.0 · source§

impl<'a> Extend<Cow<'a, OsStr>> for OsString

source§

fn extend<T: IntoIterator<Item = Cow<'a, OsStr>>>(&mut self, iter: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one #72631)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)
Reserves capacity in a collection for the given number of additional elements. Read more
1.52.0 · source§

impl Extend<OsString> for OsString

source§

fn extend<T: IntoIterator<Item = OsString>>(&mut self, iter: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one #72631)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)
Reserves capacity in a collection for the given number of additional elements. Read more
1.28.0 · source§

impl<'a> From<&'a OsString> for Cow<'a, OsStr>

source§

fn from(s: &'a OsString) -> Cow<'a, OsStr>

Converts the string reference into a Cow::Borrowed.

source§

impl<T: ?Sized + AsRef<OsStr>> From<&T> for OsString

source§

fn from(s: &T) -> OsString

Copies any value implementing AsRef<OsStr> into a newly allocated OsString.

1.18.0 · source§

impl From<Box<OsStr, Global>> for OsString

source§

fn from(boxed: Box<OsStr>) -> OsString

Converts a Box<OsStr> into an OsString without copying or allocating.

1.28.0 · source§

impl<'a> From<Cow<'a, OsStr>> for OsString

source§

fn from(s: Cow<'a, OsStr>) -> Self

Converts a Cow<'a, OsStr> into an OsString, by copying the contents if they are borrowed.

1.24.0 · source§

impl From<OsString> for Arc<OsStr>

source§

fn from(s: OsString) -> Arc<OsStr>

Converts an OsString into an Arc<OsStr> by moving the OsString data into a new Arc buffer.

1.20.0 · source§

impl From<OsString> for Box<OsStr>

source§

fn from(s: OsString) -> Box<OsStr>

Converts an OsString into a Box<OsStr> without copying or allocating.

1.28.0 · source§

impl<'a> From<OsString> for Cow<'a, OsStr>

source§

fn from(s: OsString) -> Cow<'a, OsStr>

Moves the string into a Cow::Owned.

source§

impl From<OsString> for PathBuf

source§

fn from(s: OsString) -> PathBuf

Converts an OsString into a PathBuf

This conversion does not allocate or copy memory.

1.24.0 · source§

impl From<OsString> for Rc<OsStr>

source§

fn from(s: OsString) -> Rc<OsStr>

Converts an OsString into an Rc<OsStr> by moving the OsString data into a new Rc buffer.

1.14.0 · source§

impl From<PathBuf> for OsString

source§

fn from(path_buf: PathBuf) -> OsString

Converts a PathBuf into an OsString

This conversion does not allocate or copy memory.

source§

impl From<String> for OsString

source§

fn from(s: String) -> OsString

Converts a String into an OsString.

This conversion does not allocate or copy memory.

1.52.0 · source§

impl<'a> FromIterator<&'a OsStr> for OsString

source§

fn from_iter<I: IntoIterator<Item = &'a OsStr>>(iter: I) -> Self

Creates a value from an iterator. Read more
1.52.0 · source§

impl<'a> FromIterator<Cow<'a, OsStr>> for OsString

source§

fn from_iter<I: IntoIterator<Item = Cow<'a, OsStr>>>(iter: I) -> Self

Creates a value from an iterator. Read more
1.52.0 · source§

impl FromIterator<OsString> for OsString

source§

fn from_iter<I: IntoIterator<Item = OsString>>(iter: I) -> Self

Creates a value from an iterator. Read more
1.45.0 · source§

impl FromStr for OsString

§

type Err = Infallible

The associated error which can be returned from parsing.
source§

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type. Read more
source§

impl Hash for OsString

source§

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Index<RangeFull> for OsString

§

type Output = OsStr

The returned type after indexing.
source§

fn index(&self, _index: RangeFull) -> &OsStr

Performs the indexing (container[index]) operation. Read more
1.44.0 · source§

impl IndexMut<RangeFull> for OsString

source§

fn index_mut(&mut self, _index: RangeFull) -> &mut OsStr

Performs the mutable indexing (container[index]) operation. Read more
source§

impl Ord for OsString

source§

fn cmp(&self, other: &OsString) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl OsStringExt for OsString

Available on Windows only.
source§

fn from_wide(wide: &[u16]) -> OsString

Creates an OsString from a potentially ill-formed UTF-16 slice of 16-bit code units. Read more
source§

impl OsStringExt for OsString

Available on WASI only.
source§

fn from_vec(vec: Vec<u8>) -> OsString

Creates an OsString from a byte vector. Read more
source§

fn into_vec(self) -> Vec<u8>

Yields the underlying byte vector of this OsString. Read more
source§

impl OsStringExt for OsString

Available on Unix only.
source§

fn from_vec(vec: Vec<u8>) -> OsString

Creates an OsString from a byte vector. Read more
source§

fn into_vec(self) -> Vec<u8>

Yields the underlying byte vector of this OsString. Read more
1.8.0 · source§

impl<'a, 'b> PartialEq<&'a OsStr> for OsString

source§

fn eq(&self, other: &&'a OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a> PartialEq<&'a Path> for OsString

source§

fn eq(&self, other: &&'a Path) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.29.0 · source§

impl PartialEq<&str> for OsString

source§

fn eq(&self, other: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialEq<Cow<'a, OsStr>> for OsString

source§

fn eq(&self, other: &Cow<'a, OsStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a> PartialEq<Cow<'a, Path>> for OsString

source§

fn eq(&self, other: &Cow<'a, Path>) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialEq<OsStr> for OsString

source§

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialEq<OsString> for &'a OsStr

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a> PartialEq<OsString> for &'a Path

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.29.0 · source§

impl<'a> PartialEq<OsString> for &'a str

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialEq<OsString> for Cow<'a, OsStr>

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a> PartialEq<OsString> for Cow<'a, Path>

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialEq<OsString> for OsStr

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq<OsString> for OsString

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl PartialEq<OsString> for Path

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl PartialEq<OsString> for PathBuf

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq<OsString> for str

source§

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl PartialEq<Path> for OsString

source§

fn eq(&self, other: &Path) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl PartialEq<PathBuf> for OsString

source§

fn eq(&self, other: &PathBuf) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq<str> for OsString

source§

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.8.0 · source§

impl<'a, 'b> PartialOrd<&'a OsStr> for OsString

source§

fn partial_cmp(&self, other: &&'a OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a> PartialOrd<&'a Path> for OsString

source§

fn partial_cmp(&self, other: &&'a Path) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a, 'b> PartialOrd<Cow<'a, OsStr>> for OsString

source§

fn partial_cmp(&self, other: &Cow<'a, OsStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a> PartialOrd<Cow<'a, Path>> for OsString

source§

fn partial_cmp(&self, other: &Cow<'a, Path>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a, 'b> PartialOrd<OsStr> for OsString

source§

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a, 'b> PartialOrd<OsString> for &'a OsStr

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a> PartialOrd<OsString> for &'a Path

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a, 'b> PartialOrd<OsString> for Cow<'a, OsStr>

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a> PartialOrd<OsString> for Cow<'a, Path>

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl<'a, 'b> PartialOrd<OsString> for OsStr

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl PartialOrd<OsString> for OsString

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &OsString) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &OsString) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &OsString) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &OsString) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl PartialOrd<OsString> for Path

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl PartialOrd<OsString> for PathBuf

source§

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl PartialOrd<Path> for OsString

source§

fn partial_cmp(&self, other: &Path) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.8.0 · source§

impl PartialOrd<PathBuf> for OsString

source§

fn partial_cmp(&self, other: &PathBuf) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl PartialOrd<str> for OsString

source§

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.64.0 · source§

impl Write for OsString

source§

fn write_str(&mut self, s: &str) -> Result

Writes a string slice into this writer, returning whether the write succeeded. Read more
1.1.0 · source§

fn write_char(&mut self, c: char) -> Result<(), Error>

Writes a char into this writer, returning whether the write succeeded. Read more
source§

fn write_fmt(&mut self, args: Arguments<'_>) -> Result<(), Error>

Glue for usage of the write! macro with implementors of this trait. Read more
source§

impl Sealed for OsString

Allows extension traits within std.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.