Struct core::array::iter::IntoIter

pub struct IntoIter<T, const N: usize> {
    data: [MaybeUninit<T>; N],
    alive: IndexRange,
}

A by-value array iterator.

Fields

data: [MaybeUninit<T>; N]

This is the array we are iterating over.

Elements with index i where alive.start <= i < alive.end have not been yielded yet and are valid array entries. Elements with indices i < alive.start or i >= alive.end have been yielded already and must not be accessed anymore! Those dead elements might even be in a completely uninitialized state!

So the invariants are:

• data[alive] is alive (i.e. contains valid elements)
• data[..alive.start] and data[alive.end..] are dead (i.e. the elements were already read and must not be touched anymore!)

alive: IndexRange

The elements in data that have not been yielded yet.

Invariants:

• alive.end <= N

(And the IndexRange type requires alive.start <= alive.end.)

Implementations

impl<T, const N: usize> IntoIter<T, N>

pub fn new(array: [T; N]) -> Self

👎Deprecated since 1.59.0: use IntoIterator::into_iter instead

Creates a new iterator over the given array.

pub unsafe fn new_unchecked( buffer: [MaybeUninit<T>; N], initialized: Range<usize> ) -> Self

🔬This is a nightly-only experimental API. (array_into_iter_constructors #91583)

Creates an iterator over the elements in a partially-initialized buffer.

If you have a fully-initialized array, then use IntoIterator. But this is useful for returning partial results from unsafe code.

Safety

• The buffer[initialized] elements must all be initialized.
• The range must be canonical, with initialized.start <= initialized.end.
• The range must be in-bounds for the buffer, with initialized.end <= N. (Like how indexing [0][100..100] fails despite the range being empty.)

It’s sound to have more elements initialized than mentioned, though that will most likely result in them being leaked.

Examples

#![feature(array_into_iter_constructors)]
#![feature(maybe_uninit_uninit_array_transpose)]
#![feature(maybe_uninit_uninit_array)]
use std::array::IntoIter;
use std::mem::MaybeUninit;

fn next_chunk<T: Copy, const N: usize>(
    it: &mut impl Iterator<Item = T>,
) -> Result<[T; N], IntoIter<T, N>> {
    let mut buffer = MaybeUninit::uninit_array();
    let mut i = 0;
    while i < N {
        match it.next() {
            Some(x) => {
                buffer[i].write(x);
                i += 1;
            }
            None => {
                // SAFETY: We've initialized the first `i` items
                unsafe {
                    return Err(IntoIter::new_unchecked(buffer, 0..i));
                }
            }
        }
    }

    // SAFETY: We've initialized all N items
    unsafe { Ok(buffer.transpose().assume_init()) }
}

let r: [_; 4] = next_chunk(&mut (10..16)).unwrap();
assert_eq!(r, [10, 11, 12, 13]);
let r: IntoIter<_, 40> = next_chunk(&mut (10..16)).unwrap_err();
assert_eq!(r.collect::<Vec<_>>(), vec![10, 11, 12, 13, 14, 15]);

pub fn empty() -> Self

🔬This is a nightly-only experimental API. (array_into_iter_constructors #91583)

Creates an iterator over T which returns no elements.

If you just need an empty iterator, then use iter::empty() instead. And if you need an empty array, use [].

But this is useful when you need an array::IntoIter<T, N> specifically.

Examples

#![feature(array_into_iter_constructors)]
use std::array::IntoIter;

let empty = IntoIter::<i32, 3>::empty();
assert_eq!(empty.len(), 0);
assert_eq!(empty.as_slice(), &[]);

let empty = IntoIter::<std::convert::Infallible, 200>::empty();
assert_eq!(empty.len(), 0);

[1, 2].into_iter() and [].into_iter() have different types

#![feature(array_into_iter_constructors)]
use std::array::IntoIter;

pub fn get_bytes(b: bool) -> IntoIter<i8, 4> {
    if b {
        [1, 2, 3, 4].into_iter()
    } else {
        [].into_iter() // error[E0308]: mismatched types
    }
}

But using this method you can get an empty iterator of appropriate size:

#![feature(array_into_iter_constructors)]
use std::array::IntoIter;

pub fn get_bytes(b: bool) -> IntoIter<i8, 4> {
    if b {
        [1, 2, 3, 4].into_iter()
    } else {
        IntoIter::empty()
    }
}

assert_eq!(get_bytes(true).collect::<Vec<_>>(), vec![1, 2, 3, 4]);
assert_eq!(get_bytes(false).collect::<Vec<_>>(), vec![]);

pub fn as_slice(&self) -> &[T]

Returns an immutable slice of all elements that have not been yielded yet.

pub fn as_mut_slice(&mut self) -> &mut [T]

Returns a mutable slice of all elements that have not been yielded yet.

Trait Implementations

impl<T: Clone, const N: usize> Clone for IntoIter<T, N>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Debug, const N: usize> Debug for IntoIter<T, N>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T, const N: usize> DoubleEndedIterator for IntoIter<T, N>

fn next_back(&mut self) -> Option<Self::Item>

Removes and returns an element from the end of the iterator.

fn rfold<Acc, Fold>(self, init: Acc, rfold: Fold) -> Accwhere Fold: FnMut(Acc, Self::Item) -> Acc,

An iterator method that reduces the iterator’s elements to a single, final value, starting from the back.

fn advance_back_by(&mut self, n: usize) -> Result<(), NonZeroUsize>

🔬This is a nightly-only experimental API. (iter_advance_by #77404)

Advances the iterator from the back by n elements.

fn nth_back(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element from the end of the iterator.

fn try_rfold<B, F, R>(&mut self, init: B, f: F) -> Rwhere Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

This is the reverse version of Iterator::try_fold(): it takes elements starting from the back of the iterator.

fn rfind<P>(&mut self, predicate: P) -> Option<Self::Item>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator from the back that satisfies a predicate.

impl<T, const N: usize> Drop for IntoIter<T, N>

fn drop(&mut self)

Executes the destructor for this type.

impl<T, const N: usize> ExactSizeIterator for IntoIter<T, N>

fn len(&self) -> usize

Returns the exact remaining length of the iterator.

fn is_empty(&self) -> bool

🔬This is a nightly-only experimental API. (exact_size_is_empty #35428)

Returns true if the iterator is empty.

impl<T, const N: usize> Iterator for IntoIter<T, N>

type Item = T

The type of the elements being iterated over.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn fold<Acc, Fold>(self, init: Acc, fold: Fold) -> Accwhere Fold: FnMut(Acc, Self::Item) -> Acc,

Folds every element into an accumulator by applying an operation, returning the final result.

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

fn advance_by(&mut self, n: usize) -> Result<(), NonZeroUsize>

🔬This is a nightly-only experimental API. (iter_advance_by #77404)

Advances the iterator by n elements.

fn next_chunk<const N: usize>( &mut self ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk #98326)

Advances the iterator and returns an array containing the next N values.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn step_by(self, step: usize) -> StepBy<Self> where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, U::IntoIter> where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, U::IntoIter> where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs.

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse #79524)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator.

fn map<B, F>(self, f: F) -> Map<Self, F> where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F)where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P> where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self> where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self> where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P> where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self> where Self: Sized,

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self> where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure.

fn fuse(self) -> Fuse<Self> where Self: Sized,

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F> where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Borrows an iterator, rather than consuming it.

fn collect<B: FromIterator<Self::Item>>(self) -> Bwhere Self: Sized,

Transforms an iterator into a collection.

fn collect_into<E: Extend<Self::Item>>(self, collection: &mut E) -> &mut Ewhere Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into #94780)

Collects all the items from an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B)where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn partition_in_place<'a, T: 'a, P>(self, predicate: P) -> usizewhere Self: Sized + DoubleEndedIterator<Item = &'a mut T>, P: FnMut(&T) -> bool,

🔬This is a nightly-only experimental API. (iter_partition_in_place #62543)

Reorders the elements of this iterator in-place according to the given predicate, such that all those that return true precede all those that return false. Returns the number of true elements found.

fn is_partitioned<P>(self, predicate: P) -> boolwhere Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned #62544)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> Rwhere Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> Rwhere Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn reduce<F>(self, f: F) -> Option<Self::Item>where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation.

fn try_reduce<F, R>( &mut self, f: F ) -> <<R as Try>::Residual as Residual<Option<R::Output>>>::TryTypewhere Self: Sized, F: FnMut(Self::Item, Self::Item) -> R, R: Try<Output = Self::Item>, R::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce #87053)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately.

fn all<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B>where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<F, R>( &mut self, f: F ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryTypewhere Self: Sized, F: FnMut(&Self::Item) -> R, R: Try<Output = bool>, R::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find #63178)

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize>where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn rposition<P>(&mut self, predicate: P) -> Option<usize>where P: FnMut(Self::Item) -> bool, Self: Sized + ExactSizeIterator + DoubleEndedIterator,

Searches for an element in an iterator from the right, returning its index.

fn max_by_key<B: Ord, F>(self, f: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B: Ord, F>(self, f: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn rev(self) -> Rev<Self> where Self: Sized + DoubleEndedIterator,

Reverses an iterator’s direction.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self> where Self: Sized + Iterator<Item = &'a T>, T: Copy + 'a,

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self> where Self: Sized + Iterator<Item = &'a T>, T: Clone + 'a,

Creates an iterator which clones all of its elements.

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N> where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks #100450)

Returns an iterator over N elements of the iterator at a time.

fn sum<S>(self) -> Swhere Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> Pwhere Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp_by<I, F>(self, other: I, cmp: F) -> Orderingwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, I::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by #64295)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering>where I: IntoIterator, Self::Item: PartialOrd<I::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, I::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by #64295)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<I::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> boolwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, I::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by #64295)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<I::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another.

fn lt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<I::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<I::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<I::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<I::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted_by<F>(self, compare: F) -> boolwhere Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (is_sorted #53485)

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

🔬This is a nightly-only experimental API. (is_sorted #53485)

Checks if the elements of this iterator are sorted using the given key extraction function.

impl<T, const N: usize> FusedIterator for IntoIter<T, N>

impl<T, const N: usize> TrustedLen for IntoIter<T, N>